Action based on registry change - Printable Version +- Scense (http://www.scense.com/forum) +-- Forum: Scense User Group (http://www.scense.com/forum/forumdisplay.php?fid=1) +--- Forum: Help & Troubleshooting (http://www.scense.com/forum/forumdisplay.php?fid=5) +--- Thread: Action based on registry change (/showthread.php?tid=82) |
Action based on registry change - Menno - 10-22-2015 Hi, I want to know if its possible for a Scense action to be based on a registry change. Case (simplified): I use Scense client on vmware view VDI desktops multiple locations all have different/unique subnets so user logs logs on location 1 -> gets printer from location 1 user logs in on location 2 -> gets printer from location 2 this action is based on the locations build in Scense where the actual location comes from registry setting being inserted by the vmware view agent. the "ViewClient_IP_Address" is the ip address of the actual zero client used by the user. If a user switches from location 1 to location 2 and does NOT log out and in, but takes over the session, the "ViewClient_IP_Address" in the registry changes immediately. At that point i want an action that changes the printer from "printer1" to "printer2" Any ideas how to do this? Thnx! RE: Action based on registry change - Richard - 10-22-2015 Hi Menno, You should take a look at the 'Active Location monitoring' article on ScenseGuru.com: http://scenseguru.com/2015/08/28/active-location-monitoring-in-scense-10/ Although this article describes experimental functionality, it just might help you out. Richard RE: Action based on registry change - Menno - 10-22-2015 Hi Richard, This post on ScenseGURU looks promising. Im gonna give it a shot... thnx! |